Canon imageclass MF229DW, User Manual

Page: 347 / 522

Specify settings for sending faxes.
Change Default Settings
Specify settings used for sending faxes. The selected settings are used as the default settings when scanning documents.
Changing Default Settings
Resolution
200 x 100 dpi (Normal)
200 x 200 dpi (Fine)
200 x 200 dpi (Photo)
200 x 400 dpi (Superfine)
Density
Nine Levels
2-Sided Original
Off
Book Type
Calendar Type
Sharpness
Seven Levels
Register Unit Name
Register the name of a company or person. Registering the Fax Number and Unit Name
The registered name is sent as sender information to the destination. TX Terminal ID
ECM TX
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce errors on received
faxes, see
ECM RX .
Off
On
<Menu> <Fax Settings> <Basic Settings> <Communication Management Settings> <R-Key Setting>
<PBX> Select <Prefix> or <Hooking> Enter the outside line access number if you select <Prefix>
<Apply>
<PBX>
Select the type of PBX you are using. If you select <Prefix>, register the prefix code on the next screen.
<Code>
Enter the prefix code using the numeric keys, tap <Pause>, and then tap <Apply>. If you do not insert a pause, the
prefix code is not registered.
TX Function Settings
*2
㻟㻠㻣㻌㻛㻌㻠㻣㻡
Downloaded from ManualsPrinter.com Manuals