background image

2. Installation procedures

 

 

- 7 - 

 

6) Grid attachment unit (option: CXDI-80C only) 

No. Product 

Quantity Remarks 

Grid attachment unit 

 

2 Documentation 

-  Operation 

manual, 

etc. 

 

7) Handle unit (option: CXDI-80C only) 

No. Product 

Quantity Remarks 

1 Handle 

unit 

1   

2 Documentation 

-  Operation 

manual, 

etc. 

 
 
 

* Items to be procured by the distributors 

 
• Wireless LAN access point 

Provide the specific item described below. 
Manufacturer: Cisco System 
Model: AIR-AP-1142N-

x

-K9 (where “

x

” is the regulatory domain number) 

AC adapter: 

AIR-PWR-B=   

PoE power injecter: 

AIR-PWRINJ4

 

URL:  

http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10092/datasheet_c78-502793.html

 

 
Legislation dictates that the usage band differs from one country to another so check the format in 
the country where this unit is distributed before use. The purpose of this unit is to relay wireless 
communications. 

 
• LAN cable (category 5 or above) 

This cable must support Gigabit Ethernet. 
A crossover cable or straight cable may be used when the switching hub has an Auto-MDI/MDI-X 
function. However, only a straight cable may be used when the switching hub does not have the 
function. The maximum cable length is 30 meters. 

 
• Switching hub (100Base-TX/1000Base-T switching hub) 

This cable must support Gigabit Ethernet. Preferably, Auto-MDI/MDI-X functions are provided. 
The distributors must conduct tests and operational checks before deciding on whether the switching 
hub is to be used. 

 
• Infrared data communication unit 

Provide the specific item described below. 
Manufacturer: ACTiSYS 

Corporation 

Model No.: 

ACT-IR224UN-LN115-LE 

Connection specifications:  USB 2.0 

Summary of Contents for CXDI-80C





































































































































































Reviews: