3
3
.
.
Description of Functions
- 15 -
5. Handle unit (option)
5.1 Overview
The handle unit is available as an option for the CXDI-80C Wireless. It attaches to the detector
to increase its portability.
5.2 Functions
When the handle unit is attached to the detector:
(1) Its structure is such that it will not interfere with wireless communication performance.
(2) The battery pack can be replaced.
(3) The grid attachment unit is held in place.
(4) Its structure is such that the grid can be attached or removed from the front.
(5) A detector cable can be attached or removed. (Wired connection is possible.)
To prevent the connector from being damaged when attaching or removing the handle unit from
the detector with the detector cable connected, make sure to remove the detector cable before
attaching or removing the handle unit.
Summary of Contents for CXDI-80C
Page 6: ...Note These measurements are only guidelines ...
Page 10: ...1 1 O Ov ve er rv vi ie ew w 2 2 System diagram ...
Page 48: ...2 Installation procedures 15 4 Handle unit option Corner pads Outer box Inner box ...
Page 133: ...Rev 01 CONTENTS Detector unit 1 X ray interface box unit 2 Wiring unit 4 Handle unit 6 ...
