6. Troubleshooting
- 10 -
Reference: Dealing with images with line defect trouble
When line defect (or pixel defect) trouble has occurred, Canon Inc. must decide whether the
defects can be rectified, and if they can be rectified, it re-creates the dp file. This re-created dp file
must be uploaded to the detector without fail.
The dp file must be uploaded from the ferry type FPD maintenance tool. Refer to the CXDI
Control Software NE Maintenance Manual for the operating procedure.
3.2 Access point
Using the equipment on loan, the sales company checks whether the wireless communication
trouble which occurred at the primary response stage recurs.
(1) Connect the access point (in which the trouble occurred) to the CXDI-80C system on loan.
(2) Start the AP/LNK configuration tool, and set the access point.
(3) Using infrared communication, ensure that the detector is recognized.
(4) Check whether the wireless communication trouble which occurred where the system was
installed recurs.
(5) Make inquiries with CISCO on the CISCO support page.
Reference: CISCO support page
URL (in Japanese)
http://www.cisco.com/web/JP/support/index.html
URL (in English)
http://www.cisco.com/cisco/web/support/index.html
Summary of Contents for CXDI-80C
Page 6: ...Note These measurements are only guidelines ...
Page 10: ...1 1 O Ov ve er rv vi ie ew w 2 2 System diagram ...
Page 48: ...2 Installation procedures 15 4 Handle unit option Corner pads Outer box Inner box ...
Page 133: ...Rev 01 CONTENTS Detector unit 1 X ray interface box unit 2 Wiring unit 4 Handle unit 6 ...
