Canon CXDI-80C, Service Manual

Page: 162 / 164

9. Appendix
Page 1 of 3
CXDI-80C Wireless Inspection Check Sheet
< I n s p e c t i o n I t e m s >
ITEM Category NO. Item Characteristics values Test means Record
1
Wireless
environment
1 External
Wireless communication
must be possible
Note
PC(IEEE
802.11n
incorporated)
2 Access point It must be possible to
operate
Visual check
3
Access point
setting
Channel bonding
On or Off
Frequency band
2.4 GHz or 5 GHz
Visual check
2 Battery
1 Battery status It must be possible to
charge
Visual check
2 Battery cycle Up to 300 times
Investigate
3 Sensor unit
1
Battery
installation
It must be possible to
lock or release the lock
Visual check
Touch
2
Sensor LED
(Blue, Green,
Blue-green)
Blue LED must light
when the power is ON
Visual check
3 Firmware Ver. - Visual check Ver.
4 FPGA Ver. -
Visual check
Ver.
5
Sensor unit
(wireless) IP
address
- Visual check
6
Sensor unit
(wired) IP
address
With wiring sensor unit
Visual check
7
Number of
sensor units
installed
-
Visual check
4
Sensor recognition
1
Infrared
communication
Start LNK Controller
Visual check
Sensor recognition must
be successfully done
Visual check
LED on the detector
must not show error
status
Visual check
5
X ray I/F box
1 Connectors Connectors must be
connected
Visual check
touch
2 Earth It must be grounded
Visual check
touch
3
Power Supply
cable/adaptor
Cable must not be
disconnected or plug
must not be damaged
Visual check
touch
4 POWER LED It must be turned on
Visual check
touch
5
X ray I/F box IP
address
Visual check
touch
6
Wiring unit (option)
1 Connectors Connectors must be
connected
Visual check
touch
2 POWER LED
It must be turned on
when the power supply
is on.
Visual check
3 Status indicator
LED status changes
according to the
operation status.
Visual check