Canon CXDI-50G, Service Manual

Page: 162 / 179

ror Code List for Versi
Error Code List for Version 6.00
Error Code
Seriousness
Reply
Keys
Message
[Cause]
[Operation after Reply Key is touched]
OK
Cancel #1:Error
#2: Sensor Unit: PLD Error
#3: Detected PLD Error. Call a service person.
[Cause]
A PLD error has been found in the sensor A/D board.
[Operation after Reply Key is touched]
When OK key is touched, the sensor will be disconnected.
(Access will not be made, as the system is in an "abnormal"
state.)
If this error persists even after the system is rebooted, a
service person needs to be called in. -123
Error
0xeff8
0xeff7
"PLD err (n)( eff8)”
"PLD Config err (n)( eff7)”
n: Sensor Index (1 to 4)
OK #1:Error
#2:Sensor Unit:Grid Error
#3:Because of the Grid error, this image may have a quality
problem.
[Cause]
Although a warning for grid had been detected in the sensor
A/D board, imaging was continued. Thus, the image may
have been degraded.
[Operation after Reply Key is touched]
When OK key is touched, the screen returns to the normal
display without doing anything.
-125
Error
0xeffb "Grid was changed during exposure (n)(effb)"
n: Sensor Index (1 to 4)
- 7 -