Canon Color imageRUNNER C2880i Sending And Facsimile Manual Download Page 431

Page: 431 / 470

Report and List Samples

14-9

App

end

■

USAGE T

The time taken (in minutes and seconds) to receive the document from start to finish is
printed.

■

PGS.

The number of pages that were received successfully is printed.

■

RESULT

If the documents were received successfully, "OK" is printed.

If a reception error occurred, "NG" (No Good) is printed.

If a reception error occurred, the page number in which the error occurred, and the error
code number are printed.

Confidential Fax Inbox Reception Report

This report enables you to confirm that documents were received in a Confidential
Fax Inbox.

You can set whether to automatically print a Confidential Fax Inbox Reception
Report. (See "Confidential Fax Inbox RX Report," on p. 12-10.)

NOTE

This mode is available only if the optional Super G3 FAX Board or Super G3 Multi-Line
Fax Board is installed.

■

INBOX NO./NAME

The number (00 to 49) and user assigned name of the Confidential Fax Inbox in which the
documents were received is printed.

■

JOB NO.

The four digit number, that is automatically assigned when the document is accepted for
receiving, is printed.

02/14/2006 TUE 13:53 FAX 012XXXXXXX

INBOX NO./NAME
JOB NO.
DESTINATION ADDRESS
PSWD/SUBADDRESS
DESTINATION ID
ST. TIME
USAGE T
PGS.
RESULT

#01/BOX01
5006
098XXXXXXX

Canon
02/14 13:53
00’14
1
OK

001

**********************************************

CONFIDENTIAL FAX INBOX RX REPORT

iR C3380i

***

Summary of Contents for Color imageRUNNER C2880i























































































































































































































































































































































































































































































Search results

Summary of Contents for Color imageRUNNER C2880i

Reviews:

Related manuals for Color imageRUNNER C2880i

Brands by name

Popular brands

Canon Color imageRUNNER C2880i, Sending And Facsimile Manual

Search results

Summary of Contents for Color imageRUNNER C2880i

Reviews:

Related manuals for Color imageRUNNER C2880i

Brands by name

Popular brands