Canon Color imageRUNNER C2880i Sending And Facsimile Manual Download Page 412

Page: 412 / 470

Error Messages

13-30

hootin

# 859

Cause 1

A compression error occurred with the image data.

Remedy

Check the print settings, and try printing again.

Cause 2

An original was not scanned properly, or the orientation of the original was
incorrect.

Remedy

Check the scan settings, and try scanning again.

# 860

Cause 1

A paper jam occurred during printing.

Remedy

Try printing again.

Cause 2

Recovery printing was not performed.

Remedy

Try printing again.

Cause 3

You tried to print on a transparency sheet made for color copies.

Remedy

Load transparencies made for black-and-white copies into the machine and
then try printing again.

# 861

Cause 1

An error occurred while processing PDL data or image data.

Remedy

Confirm the print settings you made when printing from a computer.

Cause 2

Color data was sent from the external controller to the billing device as
monochrome data.

Remedy

Change the print data or print settings, and try printing again.

Summary of Contents for Color imageRUNNER C2880i























































































































































































































































































































































































































































































Search results

Summary of Contents for Color imageRUNNER C2880i

Reviews:

Related manuals for Color imageRUNNER C2880i

Brands by name

Popular brands

Canon Color imageRUNNER C2880i, Sending And Facsimile Manual

Search results

Summary of Contents for Color imageRUNNER C2880i

Reviews:

Related manuals for Color imageRUNNER C2880i

Brands by name

Popular brands