manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 74

Overview of the Color imageRUNNER C3220/C2620

2-8

2

Basic Oper

ations

 

The Touch Panel Display

Keys for using the machine's main functions are located on the top of the touch 
panel display. To use any of the desired function's features, you must first press the 
key for the desired function. The area on the bottom of the touch panel display is 
used for messages that indicate the status of the machine. The System Monitor key, 
which enables you to check the status of the various devices, jobs, and 
consumables, is also displayed here.

Switching the Functions Indicated on the Touch Panel Display

After the power is turned ON, the following screen appears on the touch panel 
display. You can press [Copy], [Send], [Mail Box], [Scan], or [System Monitor] to 
change functions. (See "Initial Function at Power ON," on p. 4-20.) To display other 
functions, such as an installed MEAP (Multifunctional Embedded Application 
Platform) application, press [

➞

].

IMPORTANT

 

•

[Send] appears if the optional Color Universal Send Kit, Super G3 FAX Board, and 
Resolution Switching Board are installed, or only if the optional Color Universal Send Kit 
and Resolution Switching Board are installed. [Fax] appears only if the optional Super G3 
FAX Board and Resolution Switching Board are installed.

•

[Scan] appears only if the optional Color Network Multi-PDL Printer Kit or imagePASS is 
installed. For details on the Network Scan function, see the 

Color Network ScanGear 

User's Guide

.

•

[Printer] appears only if the optional imagePASS is installed.

NOTE

 

You can set the initial screen (the first screen that appears when the machine is turned 
ON) from the Additional Functions screen. The initial screen can be the Copy, Send or 
Fax, Mail Box, MEAP, or System Monitor screen.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands