manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 461

Clearing Paper Jams

8-31

8

T

roub

leshooting

7

Close the right cover of the main unit.

If the optional Paper Deck-P1 was moved away from the main unit, reconnect it to 
the main unit. For more information, see "Paper Deck-P1," on p. 3-13.

CAUTION

 

When closing the right cover of the main unit, be careful not to get your 
fingers caught, as this may result in personal injury.

8

Follow the instructions on the touch panel display.

NOTE

 

The screen indicating the location of the paper jam repeatedly appears on the 
touch panel display until the paper jam is entirely cleared. For more information, 
see "Screens Indicating the Locations of Paper Jams," on p. 8-3.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands