manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 35

xxxiii

This machine has a breaker that detects excess current or leakage current. Be sure 
to test the breaker once or twice a month using the following procedure.

IMPORTANT

 

•

Make sure that the main power is turned ON, and the machine is neither printing nor 
scanning before inspecting the breaker.

•

If a malfunction occurs after an inspection, contact your local authorized Canon dealer.

 

Checking the Breaker

1

Push the test button with the tip of a ball-point pen, or a 
similar object.

IMPORTANT

 

Briefly push the test button.

NOTE

 

The breaker is located on the back of the machine.

Periodic Inspection of the Breaker

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands