manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 382

Paper Drawers

7-2

7

Routine Maintenance

Paper Drawers

This section describes how to load paper into the paper drawers.

NOTE

 

•

The following paper sizes can be loaded into Paper Drawers 1, 2, 3, and 4.

- 12" x 18", 11" x 17", LGL, LTR, LTRR, STMTR, and EXEC

- Paper Drawers 3 and 4 can be used only if the optional Cassette Feeding Unit-X1 is 

attached.

•

For more information on available paper stock that can be loaded into the paper drawers, 
see "Available Paper Stock," on p. 2-60.

 

Loading Paper

If the selected paper runs out, or the selected paper drawer runs out of paper 
during printing, a screen prompting you to load paper appears on the touch panel 
display.

Follow the procedure below to load paper into the paper drawers.

CAUTION

 

When loading paper, take care not to cut your hands on the edges of the paper.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands