manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 19

xvii

 

Preventing Counterfeit Documents

This machine includes a function for aiding in the prevention of counterfeit 
documents. If you are copying documents that resemble paper money closely, you 
may be unable to get an appropriate image.

 

FCC (Federal Communications Commission)

This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
Operator's Manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his 
own expense.

Use of shielded cable is required to comply with Class A limits in Subpart B of Part 
15 of the FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise 
specified in the manual. If such changes or modifications should be made, you 
could be required to stop operation of the equipment.

Legal Notices

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands