manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 148

Finisher-M1

3-20

3

Optional Equipment

■

Staple Mode

The prints are automatically collated into sets arranged in page order and stapled. Prints 
are stapled in the following places:

•

If an original is placed on the platen glass:

•

If originals are placed into the optional feeder:

CAUTION

 

Do not place your hand in the part of the tray where stapling is performed if a 
finisher is attached, as this may result in personal injury.

Copies are stapled here.

Copies are stapled here.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands