manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 391

Paper Deck-P1 (Optional)

7-11

7

Routine Maintenance

Paper Deck-P1 (Optional)

If you attach the optional Paper Deck-P1 to the machine, you have one additional 
source of paper for printing jobs. The Paper Deck-P1 holds up to 2,700 sheets of 
paper (20 lb bond (80 g/m

2

)).

IMPORTANT

 

If the machine is in the Sleep mode (the touch panel is not displayed, and only the main 
power indicator is lit), you may not be able to open the paper deck. In this case, press the 
control panel power switch to reactivate the machine, and then press the open button on 
the paper deck.

NOTE

 

The paper size of the optional Paper Deck-P1 is fixed to LTR.

 

Loading Paper

If you select the paper deck when it has no paper, or if the paper deck runs out of 
paper during a print job, a screen prompting you to load paper appears on the 
touch panel display.

Follow the procedure below to load paper into the paper deck.

CAUTION

 

When loading paper, take care not to cut your hands on the edges of the paper.

IMPORTANT

 

The paper deck can only accommodate paper from 17 lb bond to 110 lb index (64 to 209 
g/m

2

) in weight. Use the stack bypass to load paper that is heavier.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands