manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 125

Multifunctional Operations

2-59

2

Basic Oper

ations

*7 While a PDF (Compct) file or I-fax is being sent, memory conflicts may arise if a received print job or image data 

processing job is executed. The performance of all operations affected by this memory conflict may decrease, 
depending on the amount of available memory.

NOTE

 

•

The machine's performance may be affected if several network send and receive jobs are 
being carried out at the same time. 

•

The operation of printing data from an inbox is included in "Print Data" under "Print" in the 
table.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands