manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 475

Clearing Paper Jams

8-45

8

T

roub

leshooting

 

Feeder (DADF-K1) (Optional)

If a paper jam occurs in the optional Feeder (DADF-K1), a screen similar to the one 
shown below appears on the touch panel display. Check the location of the paper 
jam, and follow the procedure described below, and the procedure that appears on 
the touch panel display, to remove the jammed paper.

WARNING

 

There are some areas inside the machine which are subject to high-voltages. 
When removing jammed paper or when inspecting the inside of the machine, do 
not allow necklaces, bracelets, or other metal objects to touch the inside of the 
machine, as this may result in burns or electrical shock.

CAUTION

 

When removing jammed originals, take care not to cut your hands on the edges 
of the originals.

1

Open the left feeder cover, and remove any jammed originals.

Left Feeder Cover

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands