manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 334

Department ID Management

6-20

6

System Manager Settings

9

Press [Done] repeatedly until the screen below appears.

NOTE

 

For instructions on entering the Department ID and password, see "Entering the 
Department ID and Password," on p. 2-35.

 

Erasing the Department ID and Password

You can erase the Department ID and password that you have registered.

NOTE

 

If Department ID Management is activated through the optional Card Reader-D1, you 
cannot delete the Department ID.

1

Press 

 (Additional Functions) 

➞

 [System Settings] 

➞

[Dept. ID Management].

If necessary, see the screen shot in step 1 of "Registering the Department ID, 
Password, and Page Limit," on p. 6-8.

If the System Manager ID and System Password have been set, enter the System 
Manager ID and System Password using 

 - 

 (numeric keys) 

➞

 press 

 (ID).

NOTE

 

If the desired setting is not displayed, press [

▼

] or [

▲

] to scroll to the desired 

setting.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands