manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 399

Finisher-N1/Saddle Finisher-N2 (Optional)

7-19

7

Routine Maintenance

Finisher-N1/Saddle Finisher-N2 (Optional)

This section describes the procedure for replacing the staple cartridge and the 
staple case in the optional Finisher-N1 or optional Saddle Finisher-N2.

 

Replacing the Staple Cartridge in the Stapler Unit

When the optional Finisher-N1 or Saddle Finisher-N2 is almost out of staples, and 
the staple cartridge in the stapler unit must be replaced, a screen similar to the one 
shown below appears on the touch panel display. Follow the procedure described 
below to replace the staple cartridge.

Use only staple cartridges intended for use with this machine.

NOTE

 

We recommend that you order staple cartridges from your local authorized Canon dealer 
before your stock runs out.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands