manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 444

Clearing Paper Jams

8-14

8

T

roub

leshooting

3

Push the button on the fixing unit's right side, and pull down 
the exit slot cover to open it.

If an optional finisher is attached to the machine, you may have to push the fixing 
unit back into the machine a little before you can open the exit slot cover.

4

While holding down the lever on the inside left corner of the 
fixing unit, open the inner cover, and remove any jammed 
paper.

CAUTION

 

The parts located around the lever inside the fixing unit are subject to high 
temperatures. When removing jammed paper, take care not to touch 
anything in this area, except the lever.

Lever

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands