Canon C3220, Reference Manual

Page: 224 / 554

Specifying Common Settings 4-42
4
Customizing Settings
Energy Consumption in the Sleep Mode
You can set the amount of energy that the machine consumes when it is in the
Sleep mode.
NOTE
•
In some cases, the energy consumption level in the Sleep mode is 'High' even when the
energy consumption level is set to 'Low', such as when:
- A job is being processed (including a forwarding job, report job, receive job, or sending
a forwarding done notice).
- The optional USB board is installed.
- The optional Token Ring board is installed.
- The optional imagePASS is installed.
- Any of the following settings are set from the Additional Functions screen:
•
The default setting is 'Low'.
1
Press (Additional Functions)
➞
[Common Settings].
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-20.
The Daily Activity Report Time setting for the Send function is set to 'On'.
(See Chapter 12, "Printing Communication Reports," in the
Sending and Facsimile
Guide .)
The Daily Activity Report Time setting for the Fax function is set to 'On'.
(See Chapter 12, "Printing Communication Reports," in the
Sending and Facsimile
Guide .)
The time limit for receiving fax documents in memory is set.
(See Chapter 6, "Receiving Documents," in the
Sending and Facsimile Guide .)
The DHCP setting is set to 'On'.
(See Chapter 3, "Using a TCP/IP Network," in the
Network Guide .)
The NetWare setting is set to 'On'.
(See Chapter 4, "Using a NetWare Network (Windows)," in the
Network Guide .)
The AppleTalk setting is set to 'On'.
(See Chapter 6, "Using an AppleTalk Network (Macintosh)," in the
Network Guide .)
The SMB setting is set to 'On'.
(See Chapter 5, "Using a NetBIOS Network," in the
Network Guide .)
The POP Interval setting is set to more than '1' minute.
(See Chapter 3, "Using a TCP/IP Network," in the
Network Guide .)