manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 273

Adjusting the Machine

4-91

4

Customizing Settings

Adjusting the Machine

This section describes how you can make fine adjustments to the settings of the 
machine, such as making a fine adjustment to the printed image and the saddle 
stitch position.

It is recommended that you perform an Automatic Gradation Adjustment and clean 
the machine regularly.

 

Zoom Fine Adjustment

When you print a copy or a document from an inbox, a slight difference in size may 
occur between the size of the original image, and the size of the copied/printed 
image. In this case, you can perform a fine adjustment to compensate for this 
difference.

Follow the procedure below to adjust the machine.

1

Press 

 (Additional Functions) 

➞

 [Adjustment/Cleaning].

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands