Canon C3220, Reference Manual

Page: 131 / 554

System Configuration 3-3
3
Optional Equipment
a a a a
Copy Tray Unit-H1
The Copy Tray Unit-H1 provides an additional
paper output tray.
b b b b
Finisher-M1
The Finisher-M1 is equipped with the following
features: Collate, Group, Offset, and Staple
(Corner).
c c
c c
Saddle Finisher-N2
The Saddle Finisher-N2 is equipped with the
following features: Collate, Group, Offset, and
Staple (Corner, Double, and Saddle Stitch).
d d d d
Finisher-N1
The Finisher-N1 is equipped with the following
features: Collate, Group, Offset, and Staple
(Corner and Double).
e e
e e
Feeder (DADF-K1)
Originals placed in the feeder are automatically
fed sheet by sheet to the platen glass for
scanning. The feeder also automatically turns
over two-sided originals to make one or
two-sided copies.
f f
f f
Platen Cover Type G
The Platen Cover Type G secures the originals
placed on the platen glass.
g g g g
Color Image Reader-C1
The Color Image Reader-C1 enables the
machine to scan and read images for copying.
h h h h
Card Reader-D1
The Card Reader-D1 enables Department ID
Management to be performed automatically.
i i
i i
Cassette Feeding Unit-X1
The Cassette Feeding Unit-X1 provides two
additional sources of paper for printing jobs.
Each paper drawer holds up to 550 sheets of
paper (20 lb bond (80 g/m
2 )).
j j j j
Plain Pedestal-C1
Use the Plain Pedestal-C1 only when the Paper
Deck-P1 or one of the finishers are attached,
and when the Cassette Feeding Unit-X1 is not
attached. This pedestal serves as an electrical
outlet for the finishers and the paper deck. You
can also use the pedestal as a means to adjust
the height of the machine.
k k k k
Paper Deck-P1
The Paper Deck-P1 provides an additional
source of paper for printing jobs.
The Paper Deck-P1 holds up to 2,700 sheets of
paper (20 lb bond (80 g/m
2
)).
NOTE
•
Only one optional finisher can be attached to the main unit at a time.
•
Either the optional Cassette Feeding Unit-X1 or Plain Pedestal-C1 can be attached to the
main unit.
•
Either the optional Platen Cover Type G or Feeder (DADF-K1) can be attached to the
main unit.