manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 506

List of Error Messages

8-76

8

T

roub

leshooting

Load LTR size paper.

 

Cause

The optimum paper size selected by the Automatic Paper Selection mode is not 
available in the machine.

 

Remedy 1 Load the indicated paper size into the machine. If you press 

 (Start) while this 

message is displayed, prints are made with the currently selected paper size.

 

Remedy 2 If the message continues to be displayed even if the indicated paper size is 

loaded, set Drawer Eligibility For APS/ADS in Common Settings (from the 
Additional Functions screen) for that paper drawer to 'On'. (See "Auto Paper 
Selection/Auto Drawer Switching," on p. 4-33.)

 Return page 1 to the top, and then press the Start key.

 

Cause

Scanning was stopped due to a problem with the optional feeder.

 

Remedy

Arrange the originals in page order with the first page on top. Place the originals 
back into the feeder's original supply tray, and press 

 (Start).

 Remove the paper from the output tray.

 

Cause

Prints from the previous job remain in the output tray.

 

Remedy

Remove the prints remaining in the output tray. Printing automatically resumes.

 Remove the paper from the booklet tray.

 

Cause

Prints from the previous job remain in the Booklet tray of the optional Saddle 
Finisher-N2.

 

Remedy

Remove the prints remaining in the Booklet tray. Printing automatically 
resumes.

 Attach the Finisher to the main unit.

 

Cause

The finisher is not properly connected to the main unit.

 

Remedy

Connect the finisher to the main unit properly. (See "Finisher-N1/Saddle 
Finisher-N2 (Optional)," on p. 8-53.)

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands