manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 355

Device Information Settings

6-41

6

System Manager Settings

2

Enter the name and location of the machine.

❑

Press [Device Name] 

➞

 enter the name of the machine 

➞

 press [OK].

❑

Press [Location] 

➞

 enter the place where the machine is located 

➞

press [OK].

❑

Press [OK].

The maximum number of characters that can be entered is 32.

If you do not want to store the name and location of the machine, press 
[Cancel].

The device name and the location of the machine are set.

NOTE

 

For instructions on entering characters, see "Entering Characters from the Touch 
Panel Display," on p. 2-29.

3

Press [Done] repeatedly until the Basic Features screen 
appears.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands