manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 385

Paper Drawers

7-5

7

Routine Maintenance

CAUTION

 

When loading paper, take care not to cut your hands on the edges of the 
paper.

IMPORTANT

 

Rewrap any remaining paper in its original package, and store it in a dry place, 
away from direct sunlight.

NOTE

 

•

For high-quality printouts, use paper recommended by Canon.

•

Before loading paper, always fan the sheets several times, and align the edges to 
facilitate feeding. Also, you should always fan paper that has just been removed 
from a newly opened paper package.

4

Load the paper stack into the paper drawer.

Even out the edges of the paper stack. Load the paper stack against the right 
wall of the paper drawer.

When loading paper into the paper drawer for the first time, set the paper size 
slide to match the paper size being loaded. (See "Adjusting a Paper Drawer to 
Hold a Different Paper Size," on p. 7-7.)

When loading paper into the paper drawer, make sure that the paper size setting 
is the same size of the paper that is being loaded.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands