manualshive.com logo in svg

Canon C3220, Reference Manual

Share
Download
Canon C3220 Reference Manual Download Page 62

Main Power and Control Panel Power

1-24

1

Bef

ore 

Y

ou Star

t Using 

This Machine

IMPORTANT

 

•

If you turn OFF the main power, wait at least 10 seconds before turning the main 
power back ON.

•

Do not turn the main power OFF if the optional Color Universal Send Kit or Super 
G3 FAX Board, and Resolution Switching Board are attached, and you want to be 
able to send or receive I-fax or fax documents. Sending or receiving I-fax or fax 
documents cannot be done when the main power is turned OFF. 

•

If SSO or SDL is set as the login service, the machine will take longer to become 
ready to scan.

5

Press the appropriate keys in accordance with the messages 
displayed on the touch panel display.

If there are no messages displayed, this step is unnecessary.

●

If the message <You must insert a control card.> appears: 

❑

Insert a control card into the optional Card Reader-D1.

The Basic Features screen is displayed.

NOTE

 

•

If the optional Card Reader-D1 is not attached, this message will not appear.

•

For instructions on using the optional Card Reader-D1, see "Card Reader-D1," on 
p. 3-29.

Summary of Contents for C3220











































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands