CANADIAN stove IDRO 20, Manual

Page: 58 / 447

2
EN
Our company declares that the stove conforms to
the following norms for the EC European Directive
labelling:
• 2014/30 UE (regulation EMCD) and following
amendments;
• 2014/35 UE (Low Voltage Directive) and following
amendments;
• 2011/65 UE (RoHS 2 directive);
• The Rules of Construction Products (CPR-Con-
struction Products Regulation) No. 305/2011 re-
garding the construction world;
• For installations in Italy, please refer to UNI
10683/98 or following changes. For the water-
thermo-sanitary equipment, let the installer give
you the conformity declaration in compliance with
L. 37/2008. While installing the unit respect the lo-
cal, national and Europen rules;
• EN 55014-1; EN 55014-2; EN 61000-3-2; EN
61000-3-3; EN 60335-1; EN 60335-2-102; EN
62233, EN 50581.
Safety information
Please carefully read this use and mainte-
nance manual before installing and operating
the stove!
If clarification is needed, please contact the dealer
or the Authorized Assistance Center.
• The pellet stove must only be operated in living
environments. This stove, being controlled by an
electronic board, permits a completely automatic
and controlled combustion; the exchange, in fact,
regulates the lighting phase, 5 power levels and
the shut down stage, guaranteeing the safe op-
eration of the stove.
• The basket used for combustion allows most of
the ash produced by the combustion of the pel-
lets to fall into the collection compartment. Nev-
ertheless, check the basket daily, given that not all
pellets have high quality standards (use only qual-
ity pellets recommended by the manufacturer).
Responsibility
With the delivery of the present manual, we decline
all responsibility, both civil and penal, for accidents
deriving from the partial or total lack of observance
of the instructions contained herein.
We decline every responsibility derived from im-
proper use of the stove, from incorrect use by the
user, from unauthorized modifications and/or re-
pairs, from the use of replacement parts that are
not original for this model.
The manufacturer declines every civil or penal, di-
rect or indirect responsibility due to:
• Lack of maintenance;
• Failure to observe the instructions contained in
the manual;
• Use in non-conformity with the safety directives;
• Installation in non-conformity with the norms in
force in the country;
• Installation by unqualified or untrained personnel;
• Modifications and repairs not authorized by the
manufacturer;
• Use of non-original replacement parts;
• Exceptional events.
Norms and declarations of conformity
ATTENTION: This warning sign indicates that the message to which it refers should
be carefully read and understood, because failure to comply with what these
notices say can cause serious damage to the stove and put the user’s safety at risk.
INFORMATION: This symbol is used to highlight information which is important for
proper stove operation. Failure to comply with these provision will compromise
use of the stove and its operation will not be satisfactory.
In the event of damage or loss, request a copy from the area technician.
These symbols indicate specific messages in this booklet: