manualshive.com logo in svg

BYD F3, Owner'S Manual

The Nikon F3, a legendary film camera, empowers photography enthusiasts with its exceptional features and versatility. Capture stunning memories with precision using this iconic device. To maximize your photographic experience, download the free Nikon F3 Instruction Manual from manualshive.com for detailed guidance and unleash your creativity.

Share
Download
background image

                                                         F3/F3R  OWNER’S  MANUAL 

 

- 171 - 

●

 

High pressure water or steam is 
effective for cleaning the vehicle’s 
underside and wheel housings. Pay 
particular attention to these areas as it is 
difficult to see all the mud and dirt. It will 
do more harm by simply wetting the mud 
and debris without removing. The lower 
edge of doors, rocker panels, and frame 
members have drain holes which should 
not be allowed to clog with dirt as   

trapped water in these areas can   
cause corrosion. 

●

 

Wash the under side of the vehicle 
thoroughly when winter is over. 

See “Washing and waxing your BYD F3” for 
more tips. 

 

Check the condition of your vehicle’s 
paint and trim.

   

If you find any chips or scratches in the paint, 
fix them up immediately to prevent corrosion 
from starting. If the chips or scratches have 
gone through the bare metal, have your BYD 
AUTO service station make the repair. 

 

Check the interior of your vehicle. 

Water 

and dust can accumulate under the floor 
mats and could cause corrosion. 
Occasionally check the underside of the mats 
to make sure the area is dry. Be particularly 
careful when transporting chemicals, 
cleansers, fertilizers, salt, etc. These should 
be transported in proper containers. If a spill 
or leak should occur, immediately clean and 

dry the area. 

 
Use mud shields on your wheels.

 If you 

drive on salted or gravel roads, mud shields 
help protect your vehicle. Full-size shields, 
which come as near to the ground as 
possible, are the best.   
We recommend that the fittings and the area 
where the shields are installed be treated to 
resist corrosion. Your BYD AUTO service 
station will be happy to assist in supplying 
and installing the shields if they are 
recommended for your area. 

 
Keep your vehicle in a well ventilated 
garage or a roofed place. Do not park your 
vehicle in a damp, poorly ventilated 
garage

. If you wash your vehicle in the 

Summary of Contents for F3










































































































































































































































Reviews:

No comments

Related manuals for F3

Saab 99 Important Operatlng, Safety And Maintenance Instructions preview
99
Brand: Saab Pages: 75
Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
Ecco Gemineye EC2014-C Installation Instructions Manual preview
Gemineye EC2014-C
Brand: Ecco Pages: 10
Ecco Reflex 5500 Series Installation And Operating Instructions Manual preview
Reflex 5500 Series
Brand: Ecco Pages: 12
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
Saab 2008 9-5 Owner'S Manual preview
2008 9-5
Brand: Saab Pages: 288
Sunsky S-GPS-0142 User Manual preview
S-GPS-0142
Brand: Sunsky Pages: 9
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
Buick 2015 LaCrosse Getting To Know Manual preview
2015 LaCrosse
Brand: Buick Pages: 20
Oldsmobile 2003 Alero Owner'S Manual preview
2003 Alero
Brand: Oldsmobile Pages: 354
THIEYE CarView 2 User Manual preview
CarView 2
Brand: THIEYE Pages: 88
Waeco MagicSpeed MS900 Installation Manual preview
MagicSpeed MS900
Brand: Waeco Pages: 120
Buick Riviera 1967 Owner'S Manual preview
Riviera 1967
Brand: Buick Pages: 58
ULTIMATE SPEED UKLL 5 A1 Operating Instructions Manual preview
UKLL 5 A1
Brand: ULTIMATE SPEED Pages: 132
Baby Jogger CITY GO PD349056A Assembly Instructions Manual preview
CITY GO PD349056A
Brand: Baby Jogger Pages: 16
Saab 12 832 509 Installation Instructions Manual preview
12 832 509
Brand: Saab Pages: 11
Peiying PY0102 Owner'S Manual preview
PY0102
Brand: Peiying Pages: 28
FORM FIT HD 13S14 Installation Instructions Manual preview
HD 13S14
Brand: FORM FIT Pages: 11

Brands by name

Popular brands

Load more brands