manualshive.com logo in svg

BYD F3, Owner'S Manual

The Nikon F3, a legendary film camera, empowers photography enthusiasts with its exceptional features and versatility. Capture stunning memories with precision using this iconic device. To maximize your photographic experience, download the free Nikon F3 Instruction Manual from manualshive.com for detailed guidance and unleash your creativity.

Share
Download
background image

                                                         F3/F3R  OWNER’S  MANUAL 

 

- 121 - 

 

 
Cigarette lighter and rear ashtray 
 
Cigarette lighter 

To use the cigarette lighter, press it in. After 
finishing heating up, it automatically pops out 
ready for use. 
If the engine is not running, the key must be 
in the “ACC” position. 
Do not keep the cigarette lighter being 
pressed in. 

Ashtray 

To use the ashtray, pull it out. 
When finishing with your cigarette, thoroughly 
extinguish it in the ashtray to prevent other 
cigarette butts from catching fire. After using 
the ashtray, close the lid completely. 

Front: 

to remove the ashtray, press down on 

the lock spring plate and pull it out.   

Rear:

 to remove the ashtray, hold the ashtray 

on both sides and pull it out. 

CAUTION 

To reduce the chance of injury in case 
of an accident or sudden stop while 
driving, always completely close the 
ashtray after use. 

Right glove box   

 

To open the glove box door, pull the lever. 

Summary of Contents for F3










































































































































































































































Reviews:

No comments

Related manuals for F3

Suzuki SX4 SEDAN 2008 Owner'S Manual preview
SX4 SEDAN 2008
Brand: Suzuki Pages: 16
Parrot CK 3000 Evolution Specifications preview
CK 3000 Evolution
Brand: Parrot Pages: 2
Chevrolet 2013 Spark Owner'S Manual preview
2013 Spark
Brand: Chevrolet Pages: 356
Ford Zephyr 2007 Owner'S Manual preview
Zephyr 2007
Brand: Ford Pages: 272
Pontiac 2004 Sunfire Owner'S Manual preview
2004 Sunfire
Brand: Pontiac Pages: 376
Jeep COMPASS 2018 Owner'S Manual preview
COMPASS 2018
Brand: Jeep Pages: 712
Thule 1306 RAPID SYSTEM Fitting Instructions Manual preview
1306 RAPID SYSTEM
Brand: Thule Pages: 8
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
Air Lift WirelessAIR 73000EZ Manual preview
WirelessAIR 73000EZ
Brand: Air Lift Pages: 12
Phonocar VM338 Mounting Instructions preview
VM338
Brand: Phonocar Pages: 6
Phonocar VM350 Mounting Instructions preview
VM350
Brand: Phonocar Pages: 2
Club Car TransPorter 4 Maintenance And Service Manual preview
TransPorter 4
Brand: Club Car Pages: 286
Aston Martin V8 Vantage Workshop Manual preview
V8 Vantage
Brand: Aston Martin Pages: 415
Ranger design 1525-PCX Installation Manual preview
1525-PCX
Brand: Ranger design Pages: 22
Safe Fleet PRIME DESIGN HRR-E-PM52 Manual preview
PRIME DESIGN HRR-E-PM52
Brand: Safe Fleet Pages: 12
Waeco MagicWatch MW150 Installation And Operating Manual preview
MagicWatch MW150
Brand: Waeco Pages: 144
Brodit 810698 Installation Instructions preview
810698
Brand: Brodit Pages: 2

Brands by name

Popular brands

Load more brands