manualshive.com logo in svg

BYD F3, Owner'S Manual

The Nikon F3, a legendary film camera, empowers photography enthusiasts with its exceptional features and versatility. Capture stunning memories with precision using this iconic device. To maximize your photographic experience, download the free Nikon F3 Instruction Manual from manualshive.com for detailed guidance and unleash your creativity.

Share
Download
background image

                                                         F3/F3R  OWNER’S  MANUAL 

 

- 107 - 

2. FRESH: To draw the external air into the 
system. 
 

“A/C” BUTTON 

 

To turn the air condition on, first turn the fan 
speed knob, and then press the “A/C” button. 
The “A/C” button indicator will illuminate. To 
turn the air conditioning off, press the button 
again or set the fan speed knob to “0”. 

 

Air flow knob settings 

 
 
 

Operating tips 

   To cool off your BYD F3 after it has been 

parked in the hot sun, drive with the 
windows open for a few minutes. 

   Make sure the air intake grilles in front of 

the windshield are not blocked (by leaves 
or snow, for example). 

   On humid days, do not blow cold air on 

the windshield. The windshield could fog 
up because of the difference in air 
temperature on the inside and outside of 
the windshield. 

   Keep the underside of front seats vacant 

so that air in vehicle can be cycled 
completely. 

  On cold days, set the fan speed to high 

speed for one minute to help clear the 
intake ducts of snow or moisture. This can 
reduce the amount of fogging in the 
windows. 

  When driving on dusty roads, close all 

windows. If dust thrown up by the vehicle is 
still drawn into the vehicle after closing the 
windows, it is recommended that the air 
intake selector be set to FRESH and the 
fan speed selector to any position expect 
“0”. 

Summary of Contents for F3










































































































































































































































Reviews:

No comments

Related manuals for F3

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
Prorack K383 Fitting Instructions Manual preview
K383
Brand: Prorack Pages: 14
Monacor CARPOWER CAP-12XHQ Manual preview
CARPOWER CAP-12XHQ
Brand: Monacor Pages: 5
Jeep Grand Cherokee WK2 Owner'S Manual preview
Grand Cherokee WK2
Brand: Jeep Pages: 338
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
aci ADARAC Aluminum M Series Installation Instructions Manual preview
ADARAC Aluminum M Series
Brand: aci Pages: 16
Imiola HAK-POL O/018 Quick Manual preview
O/018
Brand: Imiola HAK-POL Pages: 3
TATA Motors Indigo eCS Owner'S Manual & Service Book preview
Indigo eCS
Brand: TATA Motors Pages: 166
Advanced Diagnostics MVP PRO Manual preview
MVP PRO
Brand: Advanced Diagnostics Pages: 10
QA1 GS501 Installation Instructions preview
GS501
Brand: QA1 Pages: 3
Metra Electronics 99-9302 Installation Instructions Manual preview
99-9302
Brand: Metra Electronics Pages: 8
Buick Riviera 1967 Owner'S Manual preview
Riviera 1967
Brand: Buick Pages: 58
Subaru 1999 Legacy Owner'S Manual preview
1999 Legacy
Brand: Subaru Pages: 399
Skoda 2015 Superb Owner'S Manual preview
2015 Superb
Brand: Skoda Pages: 276
Kargo Master 80070 Instruction Manual preview
80070
Brand: Kargo Master Pages: 17
Thermo King V-520 RT Series Installation Manual preview
V-520 RT Series
Brand: Thermo King Pages: 56
OCAM SS2-RANGER-12 Fitting Instruction preview
SS2-RANGER-12
Brand: OCAM Pages: 4

Brands by name

Popular brands

Load more brands