manualshive.com logo in svg

BYD F3, Owner'S Manual

The Nikon F3, a legendary film camera, empowers photography enthusiasts with its exceptional features and versatility. Capture stunning memories with precision using this iconic device. To maximize your photographic experience, download the free Nikon F3 Instruction Manual from manualshive.com for detailed guidance and unleash your creativity.

Share
Download
background image

                                                         F3/F3R  OWNER’S  MANUAL 

 

- 78 - 

(a)  Brake system warning light 

This light comes on in the following cases 
when the ignition key is at the “ON” position. 
 

●

 

The brake fluid level is low. 

CAUTION 

It is dangerous to continue driving 
normally when the brake fluid level is 
low. 

Have your vehicle checked at your BYD 
AUTO service station in the following cases: 

●

 

The light does not illuminate even if the 
parking brake is applied when the 
ignition key is in the “ON” position. 

●

 

The light does not illuminate even if the 
ignition key is turned on with the parking 
brake released. 

A warning light turning on briefly during 

operation does not indicate a problem. 

 

CAUTION 

If either of the following conditions 
occurs, immediately park your vehicle at a 
safe place and contact your BYD AUTO 
service station. 

●

 

The light does not turn off even when 
the parking brake is released while 
the engine is running. In this case, 
the brakes may not work properly   

     and your stopping distance     

will become longer.           
Depress the brake pedal     
firmly and bring the vehicle     
to an immediate stop. 

●

 

The brake system warning light 
remains on together with the “ABS” 
warning light. 

In this case, not only the   
ABS will fail but also the vehicle will 
become extremely unstable during 
braking. 

 
(b)  Seat belt reminder light 

This light reminds the driver to buckle up the 
seat belt. 
Once the ignition key is turned to “ON” or 
“START”, the reminder light   
flashes if the driver’s seat belt is not   
fastened. Unless the driver fastens the belt, 
the light keeps flashing. 
 

(c)  Discharge warning light 

This light warns that the battery is being 

Summary of Contents for F3










































































































































































































































Reviews:

No comments

Related manuals for F3

Mercedes-Benz GUARD S 500 Supplement To Operators Manual preview
GUARD S 500
Brand: Mercedes-Benz Pages: 30
Kia Picanto 2015 Quick Reference Manual preview
Picanto 2015
Brand: Kia Pages: 10
Masterack RM470057 Assembly Instructions preview
RM470057
Brand: Masterack Pages: 4
Over Armour Offroad KAW-SX-SDK01 Instructions For Installation And Care preview
KAW-SX-SDK01
Brand: Over Armour Offroad Pages: 5
John Gold Gold Cruuse Cruisecontrol GC90 Installation Manual preview
Gold Cruuse Cruisecontrol GC90
Brand: John Gold Pages: 24
Whispbar K498W Fitting Instructions Manual preview
K498W
Brand: Whispbar Pages: 14
Yutrax TX107 Operator'S Manual preview
TX107
Brand: Yutrax Pages: 8
Yakima RimROC Instructions Manual preview
RimROC
Brand: Yakima Pages: 12
Axxess AXDSPX-VW1 Installation Instructions Manual preview
AXDSPX-VW1
Brand: Axxess Pages: 16
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Havis C-DMM-3005 Installation Instructions preview
C-DMM-3005
Brand: Havis Pages: 5
BrandMotion FLTW-7511 Installation Manual preview
FLTW-7511
Brand: BrandMotion Pages: 6
OMNISTOR Omni-Bike Sport Ducato Installation preview
Omni-Bike Sport Ducato
Brand: OMNISTOR Pages: 5
Menabo ANTARES KIT+1 Assembly & Instruction Manual preview
ANTARES KIT+1
Brand: Menabo Pages: 8
Seat Arona 2018 Owner'S Manual preview
Arona 2018
Brand: Seat Pages: 372
Menabo 171071 Fitting Instructions preview
171071
Brand: Menabo Pages: 4
Mercedes-Benz G 55 AMG Operator'S Manual preview
G 55 AMG
Brand: Mercedes-Benz Pages: 284

Brands by name

Popular brands

Load more brands