F3/F3R OWNER’S MANUAL
- 217 -
Before adding washer fluid Pull out the
washer fluid funnel and hang
it on the hood support rod holder.
You may use plain water as washer fluid.
However, in cold areas where the
temperatures range goes below the freezing
point, use washing fluid containing antifreeze.
This type of
product is sold in BYD AUTO service station
and many auto spare part stores. For the
commixture proportion with plain water, refer
to the manufacturer introduction.
After filling the washer fluid reservoir, ensure
that the funnel is put back in its original
position.
NOTICE
Do not use engine antifreeze or any
other substitutes because it may
damage you vehicle’s paint.
Replacing light bulbs
The following illustrations show how to take
bulbs off. When replacing a bulb, make sure
the ignition switch
and light switch are turned off. Use bulbs with
the wattage ratings given in the table.
Parking and rear position light (parking light,
rear turn-light, and braking light of F3R) are
composed of a LED set. If the blown LED
number does not comply with the local rules,
send your vehicle to BYD AUTO service
station for removing bulbs.
