manualshive.com logo in svg

BYD F3, Owner'S Manual

The Nikon F3, a legendary film camera, empowers photography enthusiasts with its exceptional features and versatility. Capture stunning memories with precision using this iconic device. To maximize your photographic experience, download the free Nikon F3 Instruction Manual from manualshive.com for detailed guidance and unleash your creativity.

Share
Download
background image

                                                             F3/F3R  OWNER’S  MANUAL 

 

- 197 - 

NOTICE 

●

 

Remember that the battery and 
ignition cables carry high currents 
or voltages. Be careful of 
accidentally causing a short circuit. 

●

 

If you spill some of the coolant, be 
sure to wash it off with water to 
prevent it from damaging the parts 
or paint. 

●

 

Do not allow dirt or anything else to 
fall through the spark plug holes. 

●

 

Do not pry the outer electrode of a 
spark plug against the center 
electrode. 

 
 

●

 

Use the prescribed spark plug only. 
The engine will be so damaged by 
using other types of spark plugs 
that it loses its function or gives off 
wireless interference. 

●

 

Do not overfill automatic 
transmission fluid and power 
steering fluid. The automatic 
transmission and power steering 
could be damaged. 

●

 

If you spill the brake fluid, be sure 
to wash it off with water to prevent 
it from damaging the parts of paint.

●

 

Do not drive with the air cleaner 
filter removed, or excessive engine 
wear could be caused.   

Also backfiring could cause a fire in 

the engine compartment. 

●

 

Be careful not to scratch the glass 
surface with the wiper frame. 

●

 

When closing the engine hood, 
check whether you have left any 
tools, rags, etc. 

 
 
 
 

 

C

M

Y

CM

MY

CY

CMY

K

折手文档 1.pdf   1   2011-3-21   17:25:02

Summary of Contents for F3










































































































































































































































Reviews:

No comments

Related manuals for F3

Happy Orange USB-C Quick Start Manual preview
USB-C
Brand: Happy Orange Pages: 2
Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
Mazdaspeed QSEA 51 96Z Installation And User Instructions Manual preview
QSEA 51 96Z
Brand: Mazdaspeed Pages: 8
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
Pyle PLCMRV8B Black User Manual preview
PLCMRV8B Black
Brand: Pyle Pages: 4
Wilco Offroad UHG2060/AU Installation Manual preview
UHG2060/AU
Brand: Wilco Offroad Pages: 4
ULTIMATE SPEED 94600 Assembly And Safety Advice preview
94600
Brand: ULTIMATE SPEED Pages: 21
NavLinkz RL2-SC14 Manual preview
RL2-SC14
Brand: NavLinkz Pages: 21
travall TDG 1486 Fitting Instructions preview
TDG 1486
Brand: travall Pages: 4
Havis-Shields Telescoping Computer Base C-TCB-34 Install Instructions preview
Telescoping Computer Base C-TCB-34
Brand: Havis-Shields Pages: 1
PEUGEOT 106 2001 Owner'S Manual preview
106 2001
Brand: PEUGEOT Pages: 107
Ranger design 1525-PCX Installation Manual preview
1525-PCX
Brand: Ranger design Pages: 22
Bulldog Security BulldogOne BD1 User Manual preview
BulldogOne BD1
Brand: Bulldog Security Pages: 7
ideus vv900 User Manual preview
vv900
Brand: ideus Pages: 116
Nugent Tipper Remote Kit User Manual preview
Tipper Remote Kit
Brand: Nugent Pages: 21
Edelbrock 4789 Installation Instructions preview
4789
Brand: Edelbrock Pages: 2

Brands by name

Popular brands

Load more brands