manualshive.com logo in svg

BYD F3, Owner'S Manual

The Nikon F3, a legendary film camera, empowers photography enthusiasts with its exceptional features and versatility. Capture stunning memories with precision using this iconic device. To maximize your photographic experience, download the free Nikon F3 Instruction Manual from manualshive.com for detailed guidance and unleash your creativity.

Share
Download
background image

                                                         F3/F3R  OWNER’S  MANUAL 

 

- 158 - 

 

2.  If coolant or steam is boiling out of the 

radiator or reservoir, stop the engine. 
Wait until the steam   

subsides and open the engine hood. If 
there is no coolant or steam boiling over, 
leave the engine running and make sure 
the electric cooling fan is operating. If it is 
not, turn the ignition switch off. 

CAUTION 

To help avoid personal injury, keep the 
hood closed until there is no steam. 
Escaping steam or coolant is a sign of 
very high pressure. 

 
3.  Look for obvious coolant leaks         

from the radiator, hoses and under the 

vehicle. However, water draining from 
the air conditioning is normal if it has   

been used. 

CAUTION 

When the engine is running, keep 
hands and clothing away from the 
moving fan and engine drive belts. 

4.  If the engine drive belt is broken or the 

coolant is leaking, stop the engine 
immediately. Call a BYD AUTO service 
station for assistance. 

5.  If there are no obvious leaks, check the 

coolant reservoir. If it is dry, add coolant 
to the reservoir while the engine is 
running. Fill it between the two lines. 

6.  After the engine coolant temperature 

has cooled to normal, check the coolant 
level in the reservoir again. If necessary, 

bring it up to half full again. Serious 
coolant loss indicates a leak in the 
system. You should   

have it checked as soon as possible at your 
BYD AUTO service station. 

If you have a flat tire 

1.  Decelerate your vehicle gradually and 

keep moving in a straight line. Move 
cautiously off the road to a safe place 
well away from the traffic. Avoid 
stopping on the center divider of a 
highway. Park in a level spot with firm 
ground. 

2.  Stop the engine and turn on your 

emergency flashers. 

3.  Firmly set the parking brake and put the 

transmission in neutral. 

Summary of Contents for F3










































































































































































































































Reviews:

No comments

Related manuals for F3

Hama Pico Operating Instructions preview
Pico
Brand: Hama Pages: 2
Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50
Jeep Grand Cherokee SRT 2014 Owner'S Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 118
Jeep 2014 Grand Cherokee Accessories Quick Reference Manual preview
2014 Grand Cherokee
Brand: Jeep Pages: 24

Brands by name

Popular brands

Load more brands