F3/F3R OWNER’S MANUAL
- 33 -
If the anti-theft system does not stay in the
states said above, the alarm stops after the
cycle. Then, the system will be reset
automatically when the auto set function is
selected.
Stopping the warn
While warning, press “LOCK” to stop it with
the anti-theft system still working.
While warning, press “UNLOCK” to
stop it with the anti-theft system not working.
Settings of optional anti-theft functions
Optional anti-theft functions:
●
Automatic setting function
For details, see the “Automatic setting
function”.
●
Automatic locking and unlocking
For details, see the “Automatic locking and
unlocking”.
●
On-board illuminating system
For details, see the “Rear interior light” and
the “Ignition switch reminder light”.
●
Starting 6 warning cycles
When the vehicle enters the anti-theft state,
an alarm will be sent and the turn signal lights
will flash 30
seconds. A cycle will be performed every 15
seconds. Three cycles are defaulted. You
can choose 6 cycles. If so, 3 and 9 warning
cycles are cancelled automatically. If 6 and 9
warning cycles are disabled, 3 warning cycles
will be enabled again.
●
Starting 9 warning cycles
Select this item to enable 9 warning cycles.
Then, 3 and 6 warning cycles are cancelled
automatically. If 6 and 9
warning cycles are disabled, 3 warning cycles
will be enabled again.
●
Delay time of entering the vehicle
(15s)
After using the wireless remote control to
open all doors, the rear interior light and
ignition key reminder light will be on for about
15 seconds (original time: 30 seconds). If
selected, the default time, 30 seconds, will be
disabled.
●
Delay time of entering the vehicle (30)
After using the wireless remote control to
open all doors, the rear interior light and
ignition key reminder light will be on for about
30 seconds. To use this function, deselect
the 15s option first. If both options are
