F3/F3R OWNER’S MANUAL
- 31 -
Press the “LOCK” switch and the manual
anti-theft setting will be exited in 1 second.
The indicator will flash slowly.
In the following situations, the anti-theft state
can not be enabled:
●
Any one door is opened.
The buzzer will buzz for about 1 second.
Close the door and try again.
Automatic setting of the function
This is an optional function. To use this
function, change the function mode first. For
details, see “Settings of optional functions”.
If you take the key out, close the side doors,
and do not operate the wireless remote
control in 30 seconds, the vehicle will enter
the anti-theft state automatically. At this time,
inserting the key into the ignition switch will
cause an alarm. When the key is at the “ON”
position, the anti-theft state will be quitted
automatically. You can also press the
“UNLOCK” switch to quit the state.
Cancel the state of anti-theft
Press the “UNLOCK” switch, and all of the
doors will be opened while the
vehicle quit the anti-theft mode.
The relations between the system state
and the actions:
●
If the anti-theft system is deactivated,
the turn signal lights will flash twice.
●
If the anti-theft system is activated, the
turn signal lights will flash three times,
and the anti-theft indicator light will flash
quickly. When the ignition key is turned
to the “ON” position, the indicator light
will be off.
After you quit the anti-theft state, the rear
interior light and ignition key reminder light
will be on for about 30 seconds go off even
when the doors are closed. The delay time
can be modified. For details, see the
“Settings of optional functions”.
If you can not quit the anti-theft mode by
using wireless remote control, you
