SAT status - SAT demod info:
BER (post
Viterbi/LDPC-BCH):
The bit error rate after forward error correction
Packet error count:
The number of erroneous packets after FEC. Packet errors
are due to either packet loss or packet bit errors
Signal to noise
ratio:
Signal to noise ratio in dB
Front-end lock:
A “bulb” indicating front end lock when green, red indicates
no lock
Level:
This is a measure of the stream signal power. It is
expressed according to the level mode selection made in
the
Setup - ETR
view:
dBm: in decibels relative to a reference value of
1
mW
dBuV: in decibels relative to a reference value of
1
µ V
dBmV: in decibels relative to a reference value of
1
mV
SAT status - SAT tuning info:
Setup name:
A name should be assigned to each frequency channel
ETR thresholds:
The name of the ETR threshold template assigned to the
current frequency
PID thresholds:
The name of the PID threshold template assigned to the
current frequency
Service thresholds:
The name of the Service threshold template assigned to
the current frequency
VBC thresholds:
The name of the VBC threshold template assigned to the
current frequency
Spectrum inversion:
Indicates whether the spectrum is inverted or not
Transponder:
The SAT tuning frequency in GHz
LNB:
The LNB frequency in GHz
Symbol rate:
The SAT symbol rate in MSymb/s
Modulation:
The SAT modulation scheme - may be QPSK, 8PSK, 16APSK
or 32APSK
FEC rate:
The forward error correction rate - may be 1/2, 2/3, 3/4, 4/5
(for Turbocode only),5/6, 6/7 (for DSS only), 7/8 or 8/9 (for
Turbocode only)
Standard:
The modulation standard - may be DVB-S1, DVB-S2, DSS or
Turbocode.
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00
-
www.bridgetech.tv
206