The probe is capable of monitoring up to 50 streams simultaneously. The probe splits
streams into pages for easy handling. Each of the 20 predefined pages can be given a
name and have a user defined number of streams associated.
Part of the page-status is error-second statistics for the fundamental parameters
MLR
,
RTP
,
overfl
and
nosig
summed across all streams belonging to that page.
The error-second statistics interval is selected by clicking the buttons. For example,
clicking the
ES-8h
button will present error-seconds for the last 8 hours. If 10 streams
for a page have been without signal for the last 8 hours, the
nosig
will show as
80hours.
The following parameters are presented (note that the error second values are
accumulated frome probe boot time, and they will only be cleared by reboot or by
clicking the
Clear all counters
button in the
Main
view):
“Bulb”:
The bulb indicates the most severe active alarm for any of the
streams on the page. Active alarms are located on top of the
alarm list
. The alarm severity is reflected by the colour of the
associated icon.
Next to the bulb is a link that will lead to the
Monitoring
page
if pressed. The Monitoring page will present error-second
statistics for each stream individually.
OK:
Shows how many of the streams monitored on this page are
without active alarms
ES(MLR):
Number of seconds in selected period with continuity counter
errors in the MPEG2 transport stream (which corresponds to
the number of seconds with non-zero Media Loss Rate).
ES(RTP):
Number of seconds in selected period with RTP packet-drop
ES(overfl):
Number of seconds in selected period with bitrate overflow
ES(nosig):
Number of seconds in selected period where no signal (i.e. no
data) was received
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00
-
www.bridgetech.tv
102