These fields are common for both the ping and the HTTP-Get protocols:
Enable:
Enable by checking toggle button.
Name:
User-defined name of service
Protocol:
Select between ping and HTTP.
Device:
Ethernet interface to use for this service.
Probe cycle:
Time interval in seconds to wait between each activation. A
value below 30 is not recommended.
Fails threshold:
The number of consecutive errors needed to raise an alarm
Hostname:
The IP address for the target. Host names are supported for
HTTP.
Comment:
Optional comment field – maximum 100 characters
These fields are specific for the HTTP-Get protocol:
PROBE USERS' MANUAL VERSION 5.0
2014 © BRIDGE Technologies Co AS - Bentsebrugata 20 - N-0476 Oslo, Norway - tel: +47 22 38 51 00
-
www.bridgetech.tv
109