Branson Krautkramer MIC 10 User Manual Download Page 8

Page: 8 / 146

1.1 Krautkrämer MIC 10

The hardness tester MIC 10 from Krautkrämer is
handy, easy to operate and can carry out tests quickly
without any difficulty.

It mainly is suitable

•

for hardness measurement of low and non-alloyed
steels,

•

for hardness measurement of high-alloyed steels,

•

for hardness measurement of nonferrous metals.

The MIC 10 can be delivered in two versions:

•

the basic version "B"

•

the Data Logger version "DL"

As opposed to the B version, the DL version has addi-
tional functions for data storage:

You can store readings in the instrument in order to
have them printed or, using special software, transfer
them to a PC. With the auxiliary Memory Card you
have access to almost unlimited storage possibilities
and flexible data processing.

Introduction

Krautkrämer MIC 10

1-2

Issue 08, 08/01

Krautkrämer MIC 10

1.1 Krautkrämer MIC 10

The hardness tester MIC 10 from Krautkrämer is
handy, easy to operate and can carry out tests quickly
without any difficulty.

It mainly is suitable

•

for hardness measurement of low and non-alloyed
steels,

•

for hardness measurement of high-alloyed steels,

•

for hardness measurement of nonferrous metals.

The MIC 10 can be delivered in two versions:

•

the basic version "B"

•

the Data Logger version "DL"

As opposed to the B version, the DL version has addi-
tional functions for data storage:

Introduction

Krautkrämer MIC 10

1-2

Issue 08, 08/01

Krautkrämer MIC 10

Summary of Contents for Krautkramer MIC 10



















































































































































Search results

Summary of Contents for Krautkramer MIC 10

Reviews:

Related manuals for Krautkramer MIC 10

Brands by name

Popular brands

Branson Krautkramer MIC 10, User Manual

Search results

Summary of Contents for Krautkramer MIC 10

Reviews:

Related manuals for Krautkramer MIC 10

Brands by name

Popular brands