Branson Krautkramer MIC 10, User Manual

Page: 59 / 146

Viewing a file and deleting single meas-
urement readings
The stored data of a measurement set can be dis-
played. The following data are shown:
•
Average value reading
•
Number of single measurement readings
•
Single measurement readings
•
Index, where you are able to select a certain single
reading
•
Standard deviation, absolute and relative
•
Range, absolute and relative
•
Calibration value
•
Dwell time
•
Lower alarm threshold (LO)
•
Upper alarm threshold (HI)
•
Probe
You have the possibility to delete single measurement
readings out of a set. The average value, standard de-
viation and rage are then recalculated.
Basic procedure
Access to the stored data is made via
.
. Individual
data of the stored measurement set can be selected
consecutively with
M
.
The status symbol DATA flashes during data viewing.
You can return to MEASUREMENT level at any time
by making another measurement.
Selecting a file
–
Press
.
.
The card number will appear on the display if the Mem-
ory Card is active (e.g.
C001 ); dL - 1 will appear if the
Data Logger is active.
–
Press
M
.
The last file number which was stored will appear:
Data storage (only MIC 10 DL)
Operation
Krautkrämer MIC 10 Issue 08, 08/01 5-23
Viewing a file and deleting single meas-
urement readings
The stored data of a measurement set can be dis-
played. The following data are shown:
•
Average value reading
•
Number of single measurement readings
•
Single measurement readings
•
Index, where you are able to select a certain single
reading
•
Standard deviation, absolute and relative
•
Range, absolute and relative
•
Calibration value
•
Dwell time
•
Lower alarm threshold (LO)
•
Upper alarm threshold (HI)
•
Probe
You have the possibility to delete single measurement
readings out of a set. The average value, standard de-
viation and rage are then recalculated.
Basic procedure
Access to the stored data is made via
.
. Individual
data of the stored measurement set can be selected
consecutively with
M
.
The status symbol DATA flashes during data viewing.
You can return to MEASUREMENT level at any time
by making another measurement.
Selecting a file
–
Press
.
.
The card number will appear on the display if the Mem-
ory Card is active (e.g.
C001 ); dL - 1 will appear if the
Data Logger is active.
–
Press
M
.
The last file number which was stored will appear:
Data storage (only MIC 10 DL)
Operation
Krautkrämer MIC 10 Issue 08, 08/01 5-23