Branson Krautkramer MIC 10, User Manual

Page: 112 / 146

HI - Read / set upper threshold
Syntax: <ESC>HI
[ (n [.m] [ (HV | HRC | HRB | HB | N/MM2 ) ] | ON |
OFF) ]<CR>
Description:
Set upper threshold value or read active setting. If a
hardness scale is not given then the active scale will
be assumed. The upper threshold is deactivated when
set to
OFF . Subsequent setting to ON activates the
upper threshold again. The threshold value is the last
one which was set.
Example:
<ESC>HI 420HV<CR> Upper threshold: 420 HV
<ESC>HI<CR>
Read status:
420HV<CR><LF> Result: 420 HV
<ESC>HI OFF<CR> Upper threshold not active
<ESC>HI<CR> Read status:
OFF<CR><LF> Result: not active
<ESC>HI ON <CR> Activate upper threshold
again
<ESC>HI<CR> Read status:
420HV<CR><LF> Result: 420 HV
)
Warning:
When you set the upper threshold, the active measure-
ment set will be terminated beforehand.
IL - Read / set display backlight status
Syntax: <ESC>IL [ (0 | 1) ]
Description:
Read or set the status of the display backlight (see
also code TL).
Example:
<ESC>IL<CR> Read backlight status:
0<CR><LF> Result: not active
<ESC>IL 1<CR> Switch backlight on
IN - Initialization
Syntax: <ESC>IN<CR>
Description:
The default setting of the instrument is loaded.
Interface and peripherals (only MIC 10 DL)
Data transfer with a PC
11-12 Issue 08, 08/01 Krautkrämer MIC 10
HI - Read / set upper threshold
Syntax: <ESC>HI
[ (n [.m] [ (HV | HRC | HRB | HB | N/MM2 ) ] | ON |
OFF) ]<CR>
Description:
Set upper threshold value or read active setting. If a
hardness scale is not given then the active scale will
be assumed. The upper threshold is deactivated when
set to
OFF . Subsequent setting to ON activates the
upper threshold again. The threshold value is the last
one which was set.
Example:
<ESC>HI 420HV<CR> Upper threshold: 420 HV
<ESC>HI<CR>
Read status:
420HV<CR><LF> Result: 420 HV
<ESC>HI OFF<CR> Upper threshold not active
<ESC>HI<CR> Read status:
OFF<CR><LF> Result: not active
<ESC>HI ON <CR> Activate upper threshold
again
<ESC>HI<CR> Read status:
420HV<CR><LF> Result: 420 HV
)
Warning:
When you set the upper threshold, the active measure-
ment set will be terminated beforehand.
IL - Read / set display backlight status
Syntax: <ESC>IL [ (0 | 1) ]
Description:
Read or set the status of the display backlight (see
also code TL).
Example:
<ESC>IL<CR> Read backlight status:
0<CR><LF> Result: not active
<ESC>IL 1<CR> Switch backlight on
IN - Initialization
Syntax: <ESC>IN<CR>
Description:
The default setting of the instrument is loaded.
Interface and peripherals (only MIC 10 DL)
Data transfer with a PC
11-12 Issue 08, 08/01 Krautkrämer MIC 10