Branson Krautkramer MIC 10, User Manual

Page: 108 / 146

AV - Read / set display mode
Syntax: <ESC>AV [ (0|1) ]
Description:
Toggle between display of singe value and average
value or read active display mode.
Examples:
<ESC>AV<CR> Read display mode
0<CR><LF> Result: single value display
<ESC>AV 1<CR> Set average value display
CA - Read / set calibration value
Syntax: <ESC>CV [ [ (+ | -) ] n ] <CR>
Description:
Set calibration value or read active value.
Range:
-9999 to +9999.
Example:
<ESC>CA 5000<CR> Set calibration value to 5000
<ESC>CA -2000<CR> Set calibration value to -2000
<ESC>CA<CR>
Read calibration value:
-2000<CR> Result: -2000
)
Warning:
When you change the calibration value, the active
measurement set will be terminated beforehand.
CF- Close data set
Syntax: <ESC>CF<CR>
Description:
Close active data set.
)
Warning: The actual measurement set is closed!
CM - Select report format
Syntax: <ESC>CM [n]<CR>
Description:
Selection of the format for the printed report. Possible
settings are:
1 = Single report: Short / Complete printout: List
2 = Single report: Short / Complete printout: Short
3 = Single report: Long / Complete printout: List
4 = Single report: Long / Complete printout: Short
5 = Single report: Long / Complete printout: Long
6 = A4 format
Interface and peripherals (only MIC 10 DL)
Data transfer with a PC
11-8 Issue 08, 08/01 Krautkrämer MIC 10
AV - Read / set display mode
Syntax: <ESC>AV [ (0|1) ]
Description:
Toggle between display of singe value and average
value or read active display mode.
Examples:
<ESC>AV<CR> Read display mode
0<CR><LF> Result: single value display
<ESC>AV 1<CR> Set average value display
CA - Read / set calibration value
Syntax: <ESC>CV [ [ (+ | -) ] n ] <CR>
Description:
Set calibration value or read active value.
Range:
-9999 to +9999.
Example:
<ESC>CA 5000<CR> Set calibration value to 5000
<ESC>CA -2000<CR> Set calibration value to -2000
<ESC>CA<CR>
Read calibration value:
-2000<CR> Result: -2000
)
Warning:
When you change the calibration value, the active
measurement set will be terminated beforehand.
CF- Close data set
Syntax: <ESC>CF<CR>
Description:
Close active data set.
)
Warning: The actual measurement set is closed!
CM - Select report format
Syntax: <ESC>CM [n]<CR>
Description:
Selection of the format for the printed report. Possible
settings are:
1 = Single report: Short / Complete printout: List
2 = Single report: Short / Complete printout: Short
3 = Single report: Long / Complete printout: List
4 = Single report: Long / Complete printout: Short
5 = Single report: Long / Complete printout: Long
6 = A4 format
Interface and peripherals (only MIC 10 DL)
Data transfer with a PC
11-8 Issue 08, 08/01 Krautkrämer MIC 10