Branson Krautkramer MIC 10, User Manual

Page: 117 / 146

OE - Output of error messages
Syntax: <ESC>OE [ (0 | 1) ] <CR>
Description:
Switching the output of error messages on/off via the
serial interface or display of the active status of the
error message output. When the function is switched
on, each error message of the instrument is output via
the serial interface, e.g.
E 1.1<CR><LF>
Example:
<ESC>OE<CR> Enquire whether error output
is switched on:
0<CR><LF> Result: not switched on
<ESC>OE 1<CR> Activate error output
0
Note:
The last setting is retained even when the instrument
is switched off.
OH - Output of measured hardness
Syntax: <ESC>OH [ (0 | 1) ] <CR>
Description:
Switching the output of the measured hardness on/off,
or display active status of the hardness reading out-
put. When the function is switched on, the measure-
ment reading are transferred in the selected hardness
scale, for example:
40.5HRC<CR><LF>
40.7HRC<CR><LF>
Example:
<ESC>OH<CR> Enquire whether hardness
output is switched on.
0 <CR><LF> Result: not switched on
<ESC>OH 1 <CR> Switch on hardness reading
output
0
Note:
The last setting is retained even after the instrument is
switched off.
Data transfer with a PC
Interface and peripherals (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 11-17
OE - Output of error messages
Syntax: <ESC>OE [ (0 | 1) ] <CR>
Description:
Switching the output of error messages on/off via the
serial interface or display of the active status of the
error message output. When the function is switched
on, each error message of the instrument is output via
the serial interface, e.g.
E 1.1<CR><LF>
Example:
<ESC>OE<CR> Enquire whether error output
is switched on:
0<CR><LF> Result: not switched on
<ESC>OE 1<CR> Activate error output
0
Note:
The last setting is retained even when the instrument
is switched off.
OH - Output of measured hardness
Syntax: <ESC>OH [ (0 | 1) ] <CR>
Description:
Switching the output of the measured hardness on/off,
or display active status of the hardness reading out-
put. When the function is switched on, the measure-
ment reading are transferred in the selected hardness
scale, for example:
40.5HRC<CR><LF>
40.7HRC<CR><LF>
Example:
<ESC>OH<CR> Enquire whether hardness
output is switched on.
0 <CR><LF> Result: not switched on
<ESC>OH 1 <CR> Switch on hardness reading
output
0
Note:
The last setting is retained even after the instrument is
switched off.
Data transfer with a PC
Interface and peripherals (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 11-17