Loading parameters
The stored settings on a parameter card can be re-
loaded into the MIC 10 at any time.
–
Close your active measurement set if you want to
keep its data.
–
Insert the parameter card into the MIC 10.
The following display appears:
The instrument loads the stored settings.
)
Attention:
When the Parameter Card is inserted, the measure-
ment set is closed and the active instrument settings
are overwritten. A protection query is not given!
You should therefore always complete your current
measurement set before inserting a Parameter Card if
you want to retain the data.
Deleting parameters
You can afterwards delete the stored settings and
again use the Parameter Card as a Memory Card to
store your measurement sets.
–
Complete your current measurement set if you want
to retain the data.
–
Insert the Parameter Card into the MIC 10.
Your instrument settings are overwritten by the set-
tings stored on the card.
–
Press
.
.
The following display appears:
–
Press
+
.
The display flashes.
–
Press
+
once more.
Operation
Data storage (only MIC 10 DL)
5-32
Issue 08, 08/01
Krautkrämer MIC 10
Loading parameters
The stored settings on a parameter card can be re-
loaded into the MIC 10 at any time.
–
Close your active measurement set if you want to
keep its data.
–
Insert the parameter card into the MIC 10.
The following display appears:
The instrument loads the stored settings.
)
Attention:
When the Parameter Card is inserted, the measure-
ment set is closed and the active instrument settings
are overwritten. A protection query is not given!
You should therefore always complete your current
measurement set before inserting a Parameter Card if
you want to retain the data.
Deleting parameters
You can afterwards delete the stored settings and
again use the Parameter Card as a Memory Card to
store your measurement sets.
–
Complete your current measurement set if you want
to retain the data.
–
Insert the Parameter Card into the MIC 10.
Your instrument settings are overwritten by the set-
tings stored on the card.
–
Press
.
.
The following display appears:
–
Press
+
.
The display flashes.
–
Press
+
once more.
Operation
Data storage (only MIC 10 DL)
5-32
Issue 08, 08/01
Krautkrämer MIC 10
Summary of Contents for Krautkramer MIC 10
