Branson Krautkramer MIC 10, User Manual

Page: 53 / 146

Reproducing the calibration
If you wish to recall the calibration parameters for the
measurement on low alloyed steels after having cali-
brated to another material, proceed as follows:
–
Press
M
until the calibration value is displayed.
–
Press
+
to set the calibration value to 0.
–
Press
-
if you require to return to MEASURE-
MENT or carry out a measurement.
The instrument is now calibrated for standard meas-
urement; the satus symbol
CAL is no longer dis-
played.
If you wish to enter the calibration parameters for a
material whose calibration value is known, proceed as
follows:
–
Press
M
until the calibration value is displayed.
–
Enter the known calibration value with
^8
.
The calibration which has been changed is corre-
spondingly displayed in the
MEASUREMENT level by
CAL .
Hardness measurement
Operation
Krautkrämer MIC 10 Issue 08, 08/01 5-17
Reproducing the calibration
If you wish to recall the calibration parameters for the
measurement on low alloyed steels after having cali-
brated to another material, proceed as follows:
–
Press
M
until the calibration value is displayed.
–
Press
+
to set the calibration value to 0.
–
Press
-
if you require to return to MEASURE-
MENT or carry out a measurement.
The instrument is now calibrated for standard meas-
urement; the satus symbol
CAL is no longer dis-
played.
If you wish to enter the calibration parameters for a
material whose calibration value is known, proceed as
follows:
–
Press
M
until the calibration value is displayed.
–
Enter the known calibration value with
^8
.
The calibration which has been changed is corre-
spondingly displayed in the
MEASUREMENT level by
CAL .
Hardness measurement
Operation
Krautkrämer MIC 10 Issue 08, 08/01 5-17