Branson Krautkramer MIC 10, User Manual

Page: 85 / 146

•
Standard Dev.: Standard deviation (absolute and
relative)
•
Min. Thickness: Minimum material thickness, size
necessary for geometrically not influenced measure-
ments
•
Readings:
List of all single measurement readings
•
deleted readings:
The single measurement readings deleted from the
measurement set are marked with "*". They are not
included in the statistical calculation.
•
+ or - out of tolerance:
Reading exceeds or is below the set alarm thre-
shold.
0
Note:
Information about calculation of the average value, the
range and the standard deviation as well as the mini-
mum thickness can be found in Chapter 12.4
Informa-
tion about statistical evaluation .
Short printout of a measurement set
The short printout is an extract from the complete
printout:
-----------------------
MIC 10 (01.01.00)
-----------------------
Date: __.__.__
Instrument SN
500
Data Source DL-1
File # F001
Cal Value 0
Tm 0 s
Probe SN 618
Test Load 5 kgf
# of Readings 3
Avg. Value 414 HV
Min. Value 405 HV
Max. Value 424 HV
Range 19 HV
4.6 %
Standard Dev. 10 HV
2.3 %
Printing data
Documentation (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 7-7
•
Standard Dev.: Standard deviation (absolute and
relative)
•
Min. Thickness: Minimum material thickness, size
necessary for geometrically not influenced measure-
ments
•
Readings:
List of all single measurement readings
•
deleted readings:
The single measurement readings deleted from the
measurement set are marked with "*". They are not
included in the statistical calculation.
•
+ or - out of tolerance:
Reading exceeds or is below the set alarm thre-
shold.
0
Note:
Information about calculation of the average value, the
range and the standard deviation as well as the mini-
mum thickness can be found in Chapter 12.4
Informa-
tion about statistical evaluation .
Short printout of a measurement set
The short printout is an extract from the complete
printout:
-----------------------
MIC 10 (01.01.00)
-----------------------
Date: __.__.__
Instrument SN
500
Data Source DL-1
File # F001
Cal Value 0
Tm 0 s
Probe SN 618
Test Load 5 kgf
# of Readings 3
Avg. Value 414 HV
Min. Value 405 HV
Max. Value 424 HV
Range 19 HV
4.6 %
Standard Dev. 10 HV
2.3 %
Printing data
Documentation (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 7-7