Branson Krautkramer MIC 10 User Manual Download Page 87

Page: 87 / 146

7.2 Data transfer with the user pro-

gram UltraDOC

Using the user program UltraDOC from Krautkrämer
you are able to transfer stored measurement sets to a
PC before editing and processing them. In addition to
this, you can remote control the MIC 10 from a PC
with this program.

The program is multilingual and has a common
graphics user interface as well as an internal text edi-
tor for various languages.

All files can be processed with commercially available
word processing or DTP programs.

You obtain detailed information about effective use of
this program in a detailed operating manual.

For data transfer with UltraDOC you require:

•

IBM compatible PC with EGA or VGA graphics card
and at least one serial interface

•

WINDOWS, version 3.0 or higher

•

a data cable TGDL/PC for connection of the MIC 10
to the printer.

Data transfer with the user program UltraDOC

Documentation (only MIC 10 DL)

Krautkrämer MIC 10

Issue 08, 08/01

7-9

7.2 Data transfer with the user pro-

gram UltraDOC

The program is multilingual and has a common
graphics user interface as well as an internal text edi-
tor for various languages.

All files can be processed with commercially available
word processing or DTP programs.

You obtain detailed information about effective use of
this program in a detailed operating manual.

For data transfer with UltraDOC you require:

•

IBM compatible PC with EGA or VGA graphics card
and at least one serial interface

•

WINDOWS, version 3.0 or higher

•

a data cable TGDL/PC for connection of the MIC 10
to the printer.

Data transfer with the user program UltraDOC

Documentation (only MIC 10 DL)

Krautkrämer MIC 10

Issue 08, 08/01

7-9

Summary of Contents for Krautkramer MIC 10



















































































































































Search results

Summary of Contents for Krautkramer MIC 10

Reviews:

Related manuals for Krautkramer MIC 10

Brands by name

Popular brands

Branson Krautkramer MIC 10, User Manual

Search results

Summary of Contents for Krautkramer MIC 10

Reviews:

Related manuals for Krautkramer MIC 10

Brands by name

Popular brands