Branson Krautkramer MIC 10, User Manual

Page: 83 / 146

Selection of report format
You can select one of five settings for the format in
which the report is to be printed.
The following are differentiated:
•
complete printout (adjustment data, statistical data,
single measurement readings)
•
complete printout in DIN A4 format with header data
and additional information
•
shortened printout (adjustment data, statistical data)
•
List (with a printout of the complete memory: meas-
urement set number with average value)
Single measurement sets can be printed completely or
in the shortened form, the complete memory as a list
with measurement sets in complete or shortened form.
A detailed description of the individual print formats is
contained on the following pages.
Setting is made in the configuration level of the MIC
10. Proceed as described in Chapter 6
Configuration ,
page 6-4.
You can select the following combination with number
1 - 5:
Single meas. sets All meas. sets
1 short printout list
2 short printout short printout of
measurement set
3 complete printout list
4 complete printout short printout of
measurement set
5 complete printout complete printout of
measurement set
6 complete printout in DIN A4 format with header
data and additional information
As default the combination 3 is set. This means you re-
ceive a complete printout when you print single meas-
urement sets, and a list when you print the complete
contents of the memory.
Select the corresponding number if you require an-
other combination.
Printing data
Documentation (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 7-5
Selection of report format
You can select one of five settings for the format in
which the report is to be printed.
The following are differentiated:
•
complete printout (adjustment data, statistical data,
single measurement readings)
•
complete printout in DIN A4 format with header data
and additional information
•
shortened printout (adjustment data, statistical data)
•
List (with a printout of the complete memory: meas-
urement set number with average value)
Single measurement sets can be printed completely or
in the shortened form, the complete memory as a list
with measurement sets in complete or shortened form.
A detailed description of the individual print formats is
contained on the following pages.
Setting is made in the configuration level of the MIC
10. Proceed as described in Chapter 6
Configuration ,
page 6-4.
You can select the following combination with number
1 - 5:
Single meas. sets All meas. sets
1 short printout list
2 short printout short printout of
measurement set
3 complete printout list
4 complete printout short printout of
measurement set
5 complete printout complete printout of
measurement set
6 complete printout in DIN A4 format with header
data and additional information
As default the combination 3 is set. This means you re-
ceive a complete printout when you print single meas-
urement sets, and a list when you print the complete
contents of the memory.
Select the corresponding number if you require an-
other combination.
Printing data
Documentation (only MIC 10 DL)
Krautkrämer MIC 10 Issue 08, 08/01 7-5